Standard Test Method for Determination of Diethanolamine, Triethanolamine,
1.1 This procedure covers the determination of diethanolamine, triethanolamine, N-methyldiethanolamine and N-ethyldiethanolamine (referred to collectively as ethanolamines in this test method) in surface water by direct injection using liquid chromatography (LC) and detected with tandem mass spectrometry (MS/MS). These analytes are qualitatively and quantitatively determined by this test method. This test method adheres to single reaction monitoring (SRM) mass spectrometry.
1.2 This test method has been developed by US EPA Region 5 Chicago Regional Laboratory (CRL).
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 The Detection Verification Level (DVL) and Reporting Range for the ethanolamines are listed in Table 1.
1.4.1 The DVL is required to be at a concentration at least 3 times below the Reporting Limit (RL) and have a signal/noise ratio greater than 3:1. Fig. 1 displays the signal/noise ratios at the DVLs and at higher concentrations for N-methyldiethanolamine.
Diethanolamine
25
24
6
96.34
51.00
156.96
31.31
10.96
32.50
9.49
Diethanolamine
50
24
6
101.41
54.00
154.80
29.54
7.97
29.13
7.91
Diethanolamine
200
24
6
101.57
61.00
138.00
20.98
10.50
20.66
10.85
Diethanolamine
425
24
6
102.06
70.00
138.82
17.98
5.90
17.61
5.70
Triethanolamine
25
24
6
87.70
35.96
157.20
27.00
25.18
30.79
27.48
Triethanolamine
50
24
6
94.95
67.00
121.66
16.39
9.57
17.26
9.66
Triethanolamine
200
22
6
105.00
79.50
132.00
14.06
11.81
13.39
11.52
Triethanolamine
425
24
6
96.94
40.00
144.94
27.56
4.41
28.43
5.76
N-Ethyldiethanolamine
25
24
6
90.61
31.00
132.00
39.42
7.47
43.51
10.42
N-Ethyldiethanolamine
50
23
6
111.88
49.00
146.00
28.71
7.19
25.66
7.56
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.