Standards Manage Your Business
We Manage Your Standards
Standards Manage Your Business
We Manage Your Standards
Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
1.1 This specification covers ferrous metal injection molded materials fabricated by mixing elemental or pre-alloyed metal powders with binders, injecting into a mold, debinding, and sintering, with or without subsequent heat treatment.
1.2 This specification covers the following injection molded materials.
1.2.1 CompositionsMIM-2200, low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel and molybdenum.
MIM-2700, low-alloy steel produced from admixtures of iron powder, and other alloying elements such as nickel and molybdenum.
MIM-4605, low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel, molybdenum, and carbon.
MIM-316L, austenitic stainless steel produced from pre-alloyed powder or an admixture of powders.
MIM-17-4 PH, precipitation hardening stainless steel produced from prealloyed powder or an admixture of powders.
MIM-430L , ferritic stainless steel produced from pre-alloyed powder or an admixture of powders.
1.3 Chemical composition limits are specified in .
1.4 Property values stated in inch-pound units are to be regarded as the standard. Conversions to SI units may be approximate.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.
