logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 62047-43:2024

Semiconductor devices - Micro-electromechanical devices - Part 43: Test method of electrical characteristics after cyclic bending deformation for flexible micro-electromechanical devices

Standard Details

IEC 62047-43:2024 specifies the test method of electrical characteristics after cyclic bending deformation for flexible electromechanical devices. These devices include passive micro components and active micro components on the flexible film or embedded in the flexible film. The desired in-plane dimensions of the device for the test method ranges typically from 1 mm to 300 mm and the thickness ranges from 10 μm to 1 mm, but these are not limiting values. The test method is so designed as to understand and further visualize the entire performance deterioration behaviour after cyclic bending deformation in a concept of 3D (P-S-N: Performance - Severity of bending - Number of cycles) plot over the loading space of severity of bending and number of repeated cycles. This document is essential to estimate safety margin over the operation period under a certain level of cyclic bending deformation and indispensable for reliable design of the product employing these devices.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 62047-43:2024
Document Year: 2024
Pages: 18
Edition: 1.0

Life Cycle

Currently Viewing

ACTIVE
IEC 62047-43:2024
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +