logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 62899-203-2:2025

Printed electronics - Part 203-2: Materials - Semiconductor ink - Space charge limited mobility measurement in printed organic semiconductive layers

Standard Details

IEC 62899-203-2:2025 specifies a method to measure the values of effective charge carrier mobility in printed semiconductive layers using space charge limited current (SCLC) mobility technique. The method described is intended to be used as a benchmark test to allow reproducible measurements at a given temperature of the apparent charge carrier mobility for comparison with devices that use different materials, material formulations and fabrication processes for a planar configuration. This document specifies the sample and equipment requirements, and describes the measurement technique, the data analysis procedure and the reporting protocol.
This document is suitable to test unipolar devices (i.e. hole-only or electron-only), where charge injection is efficient and where series resistance does not dominate the current-voltage curve. Therefore, it cannot be used for testing high-electron mobility devices where electron injection can be problematic, for testing highly doped materials where space charge limited current does not exist, or to evaluate mobility in applications that require lateral charge transport, such as in transistors.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 62899-203-2:2025
Document Year: 2025
Pages: 18
Edition: 1.0
  • Section Volume:
  • TC 119 Printed Electronics
  • ICS:
  • 31.180 Printed circuits and boards
  • 87.080 Inks. Printing inks

Life Cycle

Currently Viewing

ACTIVE
IEC 62899-203-2:2025
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2025 BSB Edge Private Limited.

Enquire now +