ISO 15875-2:2003

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes

Standard Details

ISO 15875-2:2003 specifies the characteristics of pipes made from crosslinked polyethylene (PE-X) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under operating pressures and temperatures appropriate to the class of application.

It covers a range of service conditions (application classes), design pressures and pipe dimension classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15875-1.

It also specifies the test parameters for the test methods referred to in the standard.

In conjunction with the other parts of ISO 15875, it is applicable to PE-X pipes and their joints, including joints with other PE-X components and components made of other plastics and non-plastics materials intended to be used for hot and cold water installations.

It is applicable to pipes with or without (a) barrier layer(s).

General Information

Status : Published

Standard Type: Main

Document No: ISO 15875-2:2003

Document Year: 2003

Pages: 12

Edition: 1

Section Volume:
ISO/TC 138/SC 2. Plastics pipes and fittings for water supplies

ICS:
23.040.20 Plastics pipes
91.140.60 Water supply systems

Life Cycle

Currently Viewing

Published

ISO 15875-2:2003

ISO 15875-2:2003

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form