logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J2045_201211 : 2012

Performance Requirements for Fuel System Tubing Assemblies

Standard Details

This SAE Standard encompasses the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above −40 °C (−40 °F) and below 115 °C (239 °F), and up to a maximum working gage pressure of 690 kPa (100 psig). The peak intermittent temperature is 115 °C (239 °F). For long-term continuous usage, the temperature shall not exceed 90 °C (194 °F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design accordingly.The applicable SAE StandardDetails should be referenced when designing liquid-carrying and/or vapor-carrying systems which are described in this document.Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.

Cross Reference: ASTMB117,J1645_201909,J1681_202305,J1737_201305,J1737_201908,J2027,J2027_201305,J2044,J2260,J30_202205,J517_201302,J517_201612,J526_201611

General Information

Status : Historical
Standard Type: Main
Document No: SAE J2045_201211 : 2012
Document Year: 2012
Pages: 16

Life Cycle

Currently Viewing

Historical
SAE J2045_201211 : 2012
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +