API MPMS Chapter 7.4 : 2018 (R2024)

Manual of Petroleum Measurement Standards - Chapter 7 - Temperature Determination: Section 4-Dynamic Temperature Measurement

Standard Details

This standard describes methods, equipment, installation, and operating procedures for the proper determination of the temperature of hydrocarbon liquids under dynamic conditions in custody transfer applications. This standard describes the accuracy requirement and the calibration of the temperature measurement equipment.

This standard does not cover dynamic temperature measurement of refrigerated, light hydrocarbon fluids or cryogenic liquids.

General Information

Status : ACTIVE

Standard Type: Main

Document No: API MPMS Chapter 7.4 : 2018 (R2024)

Document Year: 2018

Section Volume:
06 Petroleum Measurement

Life Cycle

Currently Viewing

ACTIVE

API MPMS Chapter 7.4 : 2018 (R2024)

Related Standards

Standard

01
Jan

Standard Practice for Sampling and Handling of Fuels for Volatility Measurement...

This practice covers procedures and equipment for obtaining, mixing, and handling representative sam...

API MPMS Chapter 8.4 : 2024

Standard

01
Jan

Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Pe...

This document covers the determination, using a glass thermohydrometer in conjunction with a series ...

API MPMS Chapter 9.3 : 2024

Standard

01
Jan

Measurement and Sampling of Cargoes Using Closed and Restricted Equipment...

This document provides guidance on the use, maintenance, and calibration of restricted and closed me...

API MPMS Chapter 17.11 : 2024

Standard

01
Feb

Measurement of Multiphase Flow...

This document addresses multiphase flow measurement in the production environment, upstream of the c...

API MPMS Chapter 20.3 : 2024

Standard

01
Mar

Testing Protocols-Flow Computational Device...

This standard supersedes MPMS Chapter 5.7 and defines the testing and reporting protocols for flow m...

API MPMS Chapter 22.5 : 2024

Standard

23
Jan

Testing Protocol for Multiphase Meter...

This testing protocol provides the minimum requirements for documenting performance testing of an in...

API MPMS Chapter 22.7 : 2023

Standard

22
Jan

Guidelines for Determining the Fullness of Pipelines Between Marine Vessels and Shore Facilities...

This document describes procedures for determining or confirming the fill condition of pipeline syst...

API MPMS Chapter 17.6 : 2022

Standard

22
Jan

Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method...

This test method covers the determination of sediment in crude oils and fuel oils by extraction with...

API MPMS Chapter 10.1 : 2022

Standard

22
Jan

Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Proced...

This test method describes the laboratory determination of water and sediment in fuel oils in the ra...

API MPMS Chapter 10.6 : 2022

Standard

22
Jan

Guidelines for Marine Cargo Inspection...

Full DescriptionThis document specifies the policy and minimum recommended practices for the manual ...

API MPMS Chapter 17.1 : 2022

Standard

22
Feb

Standard Practice for Automatic Sampling of Petroleum and Petroleum Products...

This document describes general procedures and equipment forautomatically obtaining samples of liqui...

API MPMS Chapter 8.2 : 2022

Standard

22
Feb

Standard Practice for Manual Sampling of Petroleum and Petroleum Products...

This document covers procedures and equipment for manually obtaining samples of liquid petroleum and...

API MPMS Chapter 8.1 : 2022

Standard

22
Jan

Standard Test Method for Water in Crude Oil by Distillation...

This test method covers the determination of water in crude oil by distillation. The values stated i...

API MPMS Chapter 10.2 : 2022

Standard

22
Jan

Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Proced...

Full DescriptionThis test method describes the laboratory determination of water and sediment in cru...

API MPMS Chapter 10.3 : 2022

API MPMS Chapter 7.4 : 2018 (R2024)

Standard Details

General Information

Life Cycle

Related Standards

Add Standards To Trackedge

Enquiry Form