Standards Manage Your Business
We Manage Your Standards
Standards Manage Your Business
We Manage Your Standards
Intelligent transport systems — Field device Simple Network Management Protocol (SNMP) data interface — Part 1: Global objects
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS environments, etc.
The ISO 26048 series defines data that can be used to manage field devices, including device configuration, control and monitoring. Field devices can be quite complex, necessitating the standardization of many data concepts for exchange. As such, the ISO 26048 series is divided into several individual parts. This document (ISO/TS 26048-1) introduces the ISO 26048 series, provides content that is normatively referenced in subsequent parts, and defines data that is applicable to the management of a wide range of field devices.
The scope of the ISO 26048 series does not define the logic used by the management station, the underlying protocols used to exchange the defined data elements, or internal design of the field device. However, the ISO 26048 series does define functional requirements on the interface and assumes an interface based on an SNMPv3 environment as specified by ISO 15784-2.
NOTE Many of the concepts defined in this document were derived from NTCIP 1103[1] and NTCIP 1201[2], however, the design has been updated to better address security concerns. It is expected that future versions of NTCIP will migrate to the design defined in this document.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2025 BSB Edge Private Limited.
