Standards Manage Your Business
We Manage Your Standards
Standards Manage Your Business
We Manage Your Standards
Hand-Applied Tape Coatings for Steel Water Pipe and Fittings
This standard describes protective coatings that consist of liquid adhesives and tapes and their applications to steel water pipe, joints and fittings to be used for underground and underwater pipelines. Tape coatings conforming to this standard may be field- or shop-applied, without the use of heat (i.e., not hot-applied coatings), to uncoated pipe and fittings or as a joint coating to pipe and fittings protected with organic coatings, such as those described in ANSI1/AWWA C203, ANSI/AWWA C210, ANSI/AWWA C213, ANSI/AWWA C214, ANSI/AWWA C215, ANSI/AWWA C216, ANSI/AWWA C222, ANSI/AWWA C224, ANSI/AWWA C225, ANSI/AWWA C229, and ANSI/AWWA C232. These liquid adhesives and tapes can be used for repair of ANSI/AWWA C214 machine-applied coatings in accordance with the coating manufacturer’s recommendations. These liquid adhesives and tapes are not intended for use with either exposed steel joints or sections of steel pipe where coating of cement mortar or concrete has been applied directly onto the bare steel pipe.
This standard or sections of this standard can be referenced in documents for purchasing and receiving tape coatings for steel water pipe and fittings. This standard can be used as a guide for applying, inspecting, and testing these tape coatings. The stipulations of this standard apply when this document has been referenced and only to tape coatings for steel water pipe and fittings.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2025 BSB Edge Private Limited.
