logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 11119-3:2002

Gas cylinders of composite construction — Specification and test methods — Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners

Standard Details

ISO 11119-3 specifies requirements for composite gas cylinders up to and including 450 l water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures ranging up to and including 650 bar.

ISO 11119-3 applies to:

  1. Fully wrapped composite cylinders with a non-load-sharing metallic or non-metallic liner (i.e. a liner that does not share the load of the overall cylinder design) and a design life from 10 years to non-limited life.
  2. Composite cylinders without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.

The cylinders are constructed:

  1. in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement;
  2. in the form of two filament wound shells joined together.

ISO 11119-3 does not address the design, fitting and performance of removable protective sleeves.

General Information

Status : WITHDRAWN
Standard Type: Main
Document No: ISO 11119-3:2002
Document Year: 2002
Pages: 33
Edition: 1

Life Cycle

Currently Viewing

WITHDRAWN
ISO 11119-3:2002
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +