logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 12003-1:2008

Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS

Standard Details

ISO 12003-1:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, front, two-post ROPS, including any associated rear fixtures, and is applicable to tractors so equipped having the following characteristics.

  • A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
  • A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres.
  • A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

General Information

Status : WITHDRAWN
Standard Type: Main
Document No: ISO 12003-1:2008
Document Year: 2008
Pages: 44
Edition: 2
  • ICS:
  • 65.060.10 Agricultural tractors and trailed vehicles

Life Cycle

Currently Viewing

WITHDRAWN
ISO 12003-1:2008
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +