ISO 22515:2021

Water quality — Iron-55 — Test method using liquid scintillation counting

Standard Details

This document specifies a test method for the determination of iron-55 (⁵⁵Fe) activity concentration in samples of all types of water using liquid scintillation counting (LSC). Using currently available liquid scintillation counters, this test method can measure the ⁵⁵Fe activity concentrations in the range from the limit of detection up to 120 mBq l^-1. These values can be achieved with a counting time between 7 200 s and 10 800 s for a sample volume from 0,5 l to 1,5 l. Higher activity concentrations can be measured by either diluting the sample or using smaller sample aliquots or both.

NOTE These performance indicators are wholly dependent on the measurement regimes in individual laboratories; in particular, the detection limits are influenced by amount of stable iron present.

The range of application depends on the amount of dissolved material in the water and on the performance characteristics of the measurement equipment (background count rate and counting efficiency).

It is the laboratory’s responsibility to ensure the suitability of this test method for the water samples tested.

General Information

Status : Published

Standard Type: Main

Document No: ISO 22515:2021

Document Year: 2021

Pages: 20

Edition: 1

Section Volume:
ISO/TC 147/SC 3. Radiological methods

ICS:
13.060.60 Examination of physical properties of water
17.240 Radiation measurements

Life Cycle

Currently Viewing

Published

ISO 22515:2021

ISO 22515:2021

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form