Knowledge Gateway
Unlock your learning potential with industry insights and standards that matter. Share your email to begin.
Unlock your learning potential with industry insights and standards that matter. Share your email to begin.
Status : Active
Standard Type : Main
Document No : ASTM B591 : 20a
Document Year : 2020
Pages : 6
Edition : a
Section Volume : Volume 02.01 Copper and Copper Alloys (02.01)
1.1 This specification establishes the requirements for specified copper-zinc-tin alloys and copper-zinc-tin-iron-nickel alloys plate, sheet, strip, and rolled bar. The alloys and nominal compositions are as follows:
| Copper Alloy | Copper, | Tin, | Zinc, | Phos., | Iron, | Nickel, |
|
|
|
|
|
|
|
|
| C40500 | 95 | 1 | 4 |
|
|
|
| C40810 | 95.5 | 2.0 | 2.2 | 0.03 | 0.1 | 0.15 |
| C40850 | 95.5 | 3.0 | 1.3 | 0.1 | 0.1 | 0.1 |
| C40860 | 94.8 | 2.0 | 3 | 0.03 | 0.03 | 0.1 |
| C41100 | 91 | 0.5 | 8.5 |
|
|
|
| C41300 | 91 | 1 | 8 |
|
|
|
| C41500 | 91 | 2 | 7 |
|
|
|
| C42200 | 87 | 1 | 12 |
|
|
|
| C42500 | 88 | 2 | 10 |
|
|
|
| C42520 | 89.8 | 2.0 | 8 | 0.1 | 0.1 | 0.1 |
| C43000 | 85 | 2 | 13 |
|
|
|
| C43400 | 85 | 0.7 | 14.3 |
|
|
|
1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.2.1 Exception—Average grain size in Table 3 is stated in SI units.
1.3 The following safety hazard caveat pertains only to the test method(s) described in this specification:
1.3.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International StandardDetails, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.