ASTM E3073 : 22

1.1 The purpose of this guide is to facilitate development of a waste management plan for construction, deconstruction, or demolition projects (hereafter, construction waste management (CWM) plan).

1.2 This guide applies to CWM plans developed for construction, renovation, deconstruction, and demolition of buildings, factories, parking structures, and any other structure, as well as above- and below-ground infrastructure.

1.3 This guide includes CWM plan guidance for the wastes generated on-site during construction, deconstruction, and demolition projects.

1.4 Waste generated in the manufacture, preparation, or fabrication of materials before delivery to the job site are not in the scope of this guide.

1.5 This guide does not change or substitute for any federal, state, or local statutory or regulatory provisions or requirements including, but not limited to, those related to the handling, control, containment, transport, or disposition of any particular material.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.