logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE 2016-01-1278 : 2016

Performance and Emission Characteristics of CI Engine Operated on Madhuca Indica biodiesel using Multi-Objective Optimization by Applying Taguchi Grey Relational Analysis

Standard Details

This paper’s analysis approach combines the orthogonal array design of experiments with grey relational analysis for optimization CI engine performance using blend of Madhuca Indica biodiesel as a fuel. Grey relational theory is adopted to determine the best input parameters that give lower emission and higher performance of CI engine. Five design parameters namely; compression ratio, injection pressure, injection nozzle geometry (no. of holes on nozzle of injector), additive (AA-93 2x) and fuel fraction were selected, and four levels for each factor. To reduce an experimental effort the experiments have been performed by employing Taguchi's L 16 orthogonal array for various engine performance and emission related responses. Injection nozzle geometry was found to most influencing factors . The optimal combination so obtained was further confirmed through experimentation was suitable for optimizing the performance and emission parameters of diesel engine. The optimal combination of the input parameters in CI engine operated on Madhuca indica biodiesel blend is: Compression ratio (CR) 18, fuel injection pressure (FIP) 310 bar, injection nozzle geometry (ING) 3H, fuel fraction (FF) 15% and without additive (ADD).

Cross Reference:

General Information

Status : ACTIVE
Standard Type: Main
Document No: SAE 2016-01-1278 : 2016
Document Year: 2016

Life Cycle

Currently Viewing

ACTIVE
SAE 2016-01-1278 : 2016
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +