logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 61290-10-1:2009 (EN-FR)

Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

Standard Details

IEC 61290-10-1:2009 applies to optical fibre amplifiers (OFAs) using active fibres, containing rare-earth dopants, currently commercially available. The uniform requirements for accurate and reliable measurements of the signal-spontaneous noise figure as defined in 3.1.18 of IEC 61291-1 are established. The test method independently detects amplified signal power and amplified spontaneous emission (ASE) power by launching optical pulses into the OFA under test and synchronously detecting 'on' and 'off' levels of the output pulses by using an optical sampling switch and an optical spectrum analyzer (OSA). This edition is a technical revision with updated references and cautions on proper use of the procedure.

This publication is to be read in conjunction with IEC 61291-1:2006.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 61290-10-1:2009 (EN-FR)
Document Year: 2009
Pages: 50
Edition: 2.0
  • Section Volume:
  • TC 86.SC 86C Fibre optic systems and active devices

Life Cycle

Currently Viewing

ACTIVE
IEC 61290-10-1:2009 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +