logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC/IEEE 62582-6:2019 (EN-FR)

Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance

Standard Details

IEC/IEEE 62582-6:2019 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control cables using insulation resistance measurements in the detail necessary to produce accurate and reproducible results during simulated accident conditions. It includes the requirements for the measurement system and measurement procedure, and the reporting of the measurement results.
NOTE Measurement of insulation resistance during simulated accident conditions with the aim of determining the lowest value during the accident in order to assess cable performance involves special requirements given in this document. Methods for measurement under stable (non-accident) conditions are available in other international standards, e.g. IEC 62631-3-3.
The different parts of the IEC/IEEE 62582 series are measurement standards, primarily for use in the management of ageing in initial qualification and after installation. IEC/IEEE 62582-1 includes requirements for the application of the other parts of the IEC/IEEE 62582 series and some elements which are common to all methods. Information on the role of condition monitoring in qualification of equipment important to safety is found in IEC/IEEE 60780-323.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC/IEEE 62582-6:2019 (EN-FR)
Document Year: 2019
Pages: 48
Edition: 1.0
  • Section Volume:
  • TC 45.SC 45A Instrumentation, control and electrical power systems of nuclear facilities

Life Cycle

Currently Viewing

ACTIVE
IEC/IEEE 62582-6:2019 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +