logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC TS 62607-4-4:2016

Nanomanufacturing - Key control characteristics - Part 4-4: Nano-enabled electrical energy storage - Thermal characterization of nanomaterials, nail penetration method

Standard Details

IEC TS 62607-4-4:2016(E), which is a Technical Specification, provides a measurement method for thermal runaway quality level test for nano-enabled energy storage devices. This method uses comparative measurement to enable a manufacturer to decide whether or not the nanomaterial additives used in energy storage devices are resilient against the thermal runaway caused by a faulty or accidental low resistance connection between two or several internal points depending on the number of stacking electrode layers of the test sample. The nanomaterial additives may mix with the materials of positive and negative electrodes, electrolyte, coated on electrodes or separator. This document includes definitions of terminology, test sample, puncture nail requirements, test procedures, data analysis and methods of interpretation of results and a case study. This document does not apply directly to the safety testing for energy storage device products due to complex safety design schemes embedded in these products.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC TS 62607-4-4:2016
Document Year: 2016
Pages: 17
Edition: 1.0
  • Section Volume:
  • TC 113 Nanotechnology for electrotechnical products and systems

Life Cycle

Currently Viewing

ACTIVE
IEC TS 62607-4-4:2016
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +