logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 8710:2010

Motorcycles — Brakes and brake systems — Tests and measurement methods

Standard Details

ISO 8710:2010 specifies tests and measurement methods for service brake systems and, where applicable, associated parking brake systems of two‑wheeled motorcycles (3‑3), motorcycles with sidecar (3‑4) and tricycles (3‑5) which are intended for use on public roads, in order to establish uniform worldwide test procedures for braking systems.

ISO 8710:2010 does not cover motorcycles which:

  • have a maximum speed of less than 25 km/h;
  • are equipped for disabled riders.

ISO 8710:2010 sets out the following types of tests:

  • dynamic tests:
    • dry stop test (single brake control actuated);
    • dry stop test (all service brake controls actuated);
    • high speed test;
    • wet brake test;
    • heat fade test;
  • parking brake system test;
  • failure tests:
    • partial failure test (for split service brake systems);
    • power‑assisted brake system failure test.

General Information

Status : Published
Standard Type: Main
Document No: ISO 8710:2010
Document Year: 2010
Pages: 31
Edition: 2
  • ICS:
  • 43.140 Motorcycles and mopeds

Life Cycle

Currently Viewing

Published
ISO 8710:2010
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +