Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
ISO 19272:2015 specifies a glow discharge optical emission spectrometric (GD-OES) method for determination of the mass fraction Carbon, Silicon, Manganese, Phosphorus, Sulfur, Chromium, Nickel, Aluminium, Titanium and Copper in low alloyed steels.
The content ranges to which the method is applicable are shown in Table 1.
Table 1 ? Content ranges
Element
Content ranges
mass fraction
%
C
0,060 to 0,35
Si
0,14 to 1,50
Mn
0,090 to 0,70
P
0,010to 0,070
S
0,005 to 0,050
Cr
0,008 to 0,65
Ni
0,050 to 0,50
Al
0,006 to 0,90
Ti
0,014 to 0,13
Cu
0,005 to 1,00
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.