logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE 2015-01-1103 : 2015

Improvement of Transmission Efficiency in CVT Shifting Mechanism Using Metal Pushing V-Belt

Standard Details

Pulley thrust control, changes in the trajectory of the belt as it winds around the pulleys, and the amount of friction transmission were focused on in order to reduce transmission loss and increase the transmission efficiency of CVT. In the case of pulley thrust control, making use of the linear relationship between the rotary speed fluctuation transfer characteristic and the torque transmission capacity between the pulleys and the belt, it was possible to reduce the excess safety factor of the torque transmission volume. Due to pulley tilt, the trajectory of the belt displays deviations with the theoretical geometrical winding radius. The structure of the pulleys was modified in order to reduce this deviation and increase transmission efficiency. Optimization of the additives in the CVT fluid increased the coefficient of friction, decreasing pulley thrust and increasing transmission efficiency. At the same time, the application of a carbonitriding and a zinc electric discharge coating to help prevent wear in the parts of the belt elements and pulleys making contact balanced a high coefficient of friction with wear resistance.

Cross Reference:

General Information

Status : ACTIVE
Standard Type: Main
Document No: SAE 2015-01-1103 : 2015
Document Year: 2015

Life Cycle

Currently Viewing

ACTIVE
SAE 2015-01-1103 : 2015
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +