logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J514_201201 : 2012

Hydraulic Tube Fittings

Standard Details

This SAE Standard covers complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs. Also included are pipe fittings and adapter unions for use in conjunction with these tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.These fittings are capable of providing leakproof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1 for respective sections.Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown in SAE J1065 should not be construed as a guaranteed minimum.For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory.The standard is divided into six sections as follows:Section 1 —37 Degree Flare Tube FittingsSection 2 —Flareless Tube FittingsSection 3 —O-ring Plugs (for O-ring Ports see SAE J1926)Section 4 —Hydraulic Pipe Fittings (formerly SAE J926)Section 5 —Adapter Unions (formerly in SAE J516)Section 6 —Tables for Calculating Dimensions on Special Sizes

Cross Reference: ANSI/B1.20.1,ANSI/B1.20.3,ASTMB117,J1065_201605,J343_201605,J405_201801,J476,J533_201702

General Information

Status : Revised
Standard Type: Main
Document No: SAE J514_201201 : 2012
Document Year: 2012
Pages: 54

Life Cycle

Currently Viewing

Revised
SAE J514_201201 : 2012
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +