logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J1489_200005 : 2000

Heavy Truck and Bus Retarder Downhill Performance Mapping Procedure

Standard Details

The procedure covers the estimation of the total retardation capability available to a specific vehicle from:aNatural retardation (rolling resistance, aerodynamic drag, etc).bEngine dragcEngine, integral automatic transmission, driveline or trailer-axle retardersIt assumes that foundation brakes are not used for maintaining speed on long mountain descents. Retardation is rated in terms of the maximum grades on which stable control speeds can be maintained for each gear over the range of highway speeds appropriate to that gear. For each gear , the calculation procedure determines maximum grades for at least four values of control speed ranging from the vehicle velocity corresponding to full load governed engine rpm, to the vehicle velocity corresponding to the engine rpm at minimum (idle) speed. In addition, the calculation procedure provides information on the total retarding power available for each gear.

Cross Reference: J1252

General Information

Status : Revised
Standard Type: Main
Document No: SAE J1489_200005 : 2000
Document Year: 2000
Pages: 17

Life Cycle

Currently Viewing

Revised
SAE J1489_200005 : 2000
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +