logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 61755-6-2:2018 (EN-FR)

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 μm core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850 nm using selected A1a fibre only

Standard Details

IEC 61755-6-2: 2018 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connectors with cylindrical ferrules intended to be used for attenuation measurements in the field or factory. One grade of reference connector is defined in this document. The reference connector is terminated to selected IEC 60793-2-10:2015 A1a fibre. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.
Keywords: optical interface, fibre-to-fibre interconnection

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 61755-6-2:2018 (EN-FR)
Document Year: 2018
Pages: 25
Edition: 1.0
  • Section Volume:
  • TC 86.SC 86B Fibre optic interconnecting devices and passive components
  • ICS:
  • 33.180.20 Fibre optic interconnecting devices

Life Cycle

Currently Viewing

ACTIVE
IEC 61755-6-2:2018 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +