logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 61755-2-5:2015

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications

Standard Details

IEC 61755-2-5:2015 defines a set of prescribed conditions that should be maintained in order to satisfy the requirements of angled polished reference connections. The prescribed conditions include dimensional limits and optical fibre requirements of the optical interface to meet specific requirements for reference connection (plugs and adaptors) used for attenuation measurements. Two different grades for reference connections are defined in this standard. The use of each of these grades depends on the application and on the targeted attenuation measurement uncertainty. The model uses a Gaussian distribution of light intensity over the specified restricted mode field diameter (MFD) range. This standard is intended to be used for shipping and acceptance inspections. The reference connector plug is specified for B1.1, B1.3 and B6 fibres as specified in IEC 60793-2-50. The use of the reference connector plug would not be recommended where classification of fibre is difficult, for example construction and maintenance of cable plant. Keywords: angled polished reference connections, plugs and adaptors, attenuation measurements

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 61755-2-5:2015
Document Year: 2015
Pages: 10
Edition: 1.0
  • Section Volume:
  • TC 86.SC 86B Fibre optic interconnecting devices and passive components
  • ICS:
  • 33.180.20 Fibre optic interconnecting devices

Life Cycle

Currently Viewing

ACTIVE
IEC 61755-2-5:2015
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +