logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J1095_202105 : 2021

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

Standard Details

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters ranging from 165.1 to 335.0 mm (6.500 to 13.189 inches). It is up to each hub and/or wheel for demountable rims manufacturer to determine the appropriate test method, accelerated load factor and cycle life requirements applicable to obtain satisfactory service life for a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters as necessary to ensure satisfactory service life for the intended application. It should be noted that this test procedure focuses on fatigue resulting from vehicle loading and cornering forces. It does not consider loads imparted to the hub from braking events.

Cross Reference: J1835_201401,J393_201710,J694_201505,J851

General Information

Status : Revised
Standard Type: Main
Document No: SAE J1095_202105 : 2021
Document Year: 2021
Pages: 10

Life Cycle

Currently Viewing

Revised
SAE J1095_202105 : 2021
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +