IEC 60068-2-30:2005 (EN-FR)

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Standard Details

IEC 60068-2-30:2005 Determines the suitability of components, equipment or other articles for use, transportation and storage under conditions of high humidity - combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. If the test is being used to verify the performance of a specimen whilst it is being transported or stored in packaging then the packaging will normally be fitted when the test conditions are being applied. For small, low mass specimens, it may be difficult to produce condensation on the surface of the specimen using this procedure; users should consider the use of an alternative procedure such as that given to IEC 60068-2-38. The main changes with respect to the previous edition are listed below:
- editorial changes,
- addition of normative references,
- addition of guidance for temperature tolerances,
- period for recovery has been extended.

General Information

Status : ACTIVE

Standard Type: Main

Document No: IEC 60068-2-30:2005 (EN-FR)

Document Year: 2005

Pages: 27

Edition: 3.0

Section Volume:
TC 104 Environmental conditions, classification and methods of test

ICS:
19.040 Environmental testing

Preview Document

Life Cycle

Currently Viewing

ACTIVE

IEC 60068-2-30:2005 (EN-FR)

IEC 60068-2-30:2005 (EN-FR)

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form