IEC 60544-2:2012 (EN-FR)

Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test

Standard Details

IEC 60544-2:2012 specifies the controls maintained over the exposure conditions during and after the irradiation of insulating materials with ionizing radiation prior to the determination of radiation-induced changes in physical or chemical properties. This standard specifies a number of potentially significant irradiation conditions as well as various parameters which can influence the radiation-induced reactions under these conditions. The objective of this standard is to emphasize the importance of selecting suitable specimens, exposure conditions and test methods for determining the effect of radiation on appropriately chosen properties. Since many materials are used either in air or in inert environments, standard exposure conditions are recommended for both of these situations. It should be noted that this standard does not consider measurements which are performed during the irradiation. This edition includes the following significant technical changes with respect to the previous edition:
- alignment with standards recently developed by SC 45A as well as with other parts in the IEC 60544 series.

General Information

Status : ACTIVE

Standard Type: Main

Document No: IEC 60544-2:2012 (EN-FR)

Document Year: 2012

Pages: 45

Edition: 3.0

Section Volume:
TC 112 Evaluation and qualification of electrical insulating materials and systems

ICS:
17.240 Radiation measurements
29.035.01 Insulating materials in general

Preview Document

Life Cycle

Currently Viewing

ACTIVE

IEC 60544-2:2012 (EN-FR)

IEC 60544-2:2012 (EN-FR)

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form