logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J2730_202101 : 2021

Dynamic Cleat Test with Perpendicular and Inclined Cleats

Standard Details

This SAE Recommended Practice describes a test method for measuring the forces and moments generated at a high frequency response spindle when a rolling tire impacts a cleat. The cleat is configured either with its crest perpendicular, 90 degrees, to the path of the tire or optionally with its crest inclined at an angle to the path of the tire. The carriage to which the spindle is attached is rigidly constrained in position during each test condition to provide a good approximation to fixed loaded radius operation. The method discussed in this document provides impact force and moment time histories essentially free from variations due to tire non-uniformities. The method applies to any size tire so long as the equipment is properly scaled to conduct the measurements for the intended test tire. The data are suitable for use in determining parameters for road load models and for comparative evaluations of the measured properties in research and development.

Cross Reference: 2001-01-0790,770870,810066,ISO17025,J2047_201303,J2047_201911,J2429_201509,J2710_201204,J2710_201709,J2717_201206,J2717_201805,OSHA1910.177

General Information

Status : Historical
Standard Type: Main
Document No: SAE J2730_202101 : 2021
Document Year: 2021
Pages: 22

Life Cycle

Currently Viewing

Historical
SAE J2730_202101 : 2021
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +