logo

Standards Manage Your Business

We Manage Your Standards

NEMA

NEMA 62321-7-2:2017

Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method

Standard Details

Owner: Marchionini, Brian Product Areas: Industrial Products & Systems Divisions: IS - Industrial Products & Systems ESPG Category: Industrial Automation Controls Description: IEC 62321-7-2:2017 describes procedures to measure hexavalent chromium, Cr(VI), quantitatively in samples of polymers and electronics. This method employs organic solvent to dissolve or swell the sample matrix, followed by an alkaline digestion procedure to extract Cr(VI) from samples. Studies have shown that organic/alkaline solution is more effective than acidic solution in extracting Cr(VI) from soluble and insoluble samples. Minimal reduction of Cr(VI) to Cr(III) or oxidation of Cr(III) to Cr(VI) occurs under alkaline conditions. The first edition of IEC 62321:2008 was a ‘stand-alone’ standard that included an introduction, an overview of test methods, a mechanical sample preparation as well as various test method clauses. This first edition of IEC 62321-7-2 is a partial replacement of IEC 62321:2008, forming a structural revision and generally replacing Annex C. IEC 62321-7-2 is the final replacement part of the corresponding clauses in IEC 62321:2008.

General Information

Status : ACTIVE
Standard Type: Main
Document No: NEMA 62321-7-2:2017
Document Year: 2023
Pages: 16
  • Section Volume:
  • US IS - Industrial Products & Systems

Life Cycle

Currently Viewing

ACTIVE
NEMA 62321-7-2:2017
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +