logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J1118_201212 : 2012

Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure

Standard Details

The SAE Recommended Practice specifies the test procedure to assure valve assemblies which are satisfactory for vehicle usage, and it is applicable to new valve assemblies for commercial production. It covers such valves where they are employed in passenger car and light truck brake systems utilizing motor vehicle hydraulic brake fluids. This procedure and requirements (SAE J1137) was developed for brake fluids conforming to SAE J1703 and FMVSS 116 (DOT 3); however, it may be utilized for valves which use DOT 4 or DOT 5 brake fluid.These procedure specifications were developed for base brake operation and do not consider the effects of ABS (anti-lock brake systems) or traction control systems which may have a significant effect on the valve. Careful analysis of the particular type ABS and/or traction control (if included in the system) should be made and additional tests are required which are not included in this document. Provisions for ABS and traction control will be incorporated in a future revision or covered in a separate document.The minimum performance requirements are specified in SAE J1137.

Cross Reference: FMVSS116,J1137,J1703_201408

General Information

Status : Stabilized
Standard Type: Main
Document No: SAE J1118_201212 : 2012
Document Year: 2012
Pages: 10

Life Cycle

Currently Viewing

Stabilized
SAE J1118_201212 : 2012
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +