logo

Standards Manage Your Business

We Manage Your Standards

CSA

CSA C22.2 NO. 197:M83 (R2023)

PVC insulating tape

Standard Details

Preface This is the first edition of CSA Standard C22.2 No. 197, Pvc Insulating Tape . It is written in SI (metric) units. This Standard applies to polyvinyl chloride for (PVC) insulating tape for use at a maximum temperature of 6 0, 80,90 or 105°C, insulating joints and splices in wires and cables having voltage ratings up to 1000 V, in accordance with the Canadian Electrical Code, Part I. The tape is intended to be applied in layers, each layer being half-lapped and each joint or splice insulated so as to provide an acceptable level of insulation. For general information on the Standards of the Canadian Electrical Code, Part II, see the preface of CSA Standard C22.2 No. 0, General Requirements—Canadian Electrical Code, Part II. This Standard was prepared under the jurisdiction of the Standards Steering Committee on Canadian Electrical Code, Part II and was formally approved both by this Committee and by the Technical Committee on Wiring Products. Scope This Standard applies to polyvinyl chloride (PVC) insulating tape for use at a maximum temperature of 60, 80, 90 or 105°C, for insulating joints and splices in wires and cables having voltage ratings up to 1000 V, in accordance with the Canadian Electrical Code, Part I. The tape is intended to be applied in layers, each layer being half-lapped, and each joint or splice insulated so as to provide an acceptable level of insulation.

General Information

Status : ACTIVE
Standard Type: Main
Document No: CSA C22.2 NO. 197:M83 (R2023)
Document Year: 1983
Pages: 19

Life Cycle

Currently Viewing

ACTIVE
CSA C22.2 NO. 197:M83 (R2023)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +