ISO 9239-2:2002

Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2

Standard Details

ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover).

This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results.

This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

General Information

Status : Published

Standard Type: Main

Document No: ISO 9239-2:2002

Document Year: 2002

Pages: 20

Edition: 1

Section Volume:
ISO/TC 92/SC 1. Fire initiation and growth

ICS:
13.220.40 Ignitability and burning behaviour of materials and products
97.150 Non-textile floor coverings

Life Cycle

Currently Viewing

Published

ISO 9239-2:2002

ISO 9239-2:2002

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form